Tech-Recipes - Latest Comments in Cisco 2950 Switch: Create a VLAN | Cisco switch | Tech-Recipes

Re: Cisco 2950 Switch: Create a VLAN | Cisco switch | Tech-Recipes

Devin Ryan — Sat, 19 Sep 2009 11:40:32 -0000

In order to change the which vlan the port is on execute the following command:
2950# config t
2950(config)# int Gi0/1
2950(config-if)# switchport mode access
2950(config-if)# switchport access vlan 100
2950(config-if)# exit
2950(config)#exit

Re: Cisco 2950 Switch: Create a VLAN | Cisco switch | Tech-Recipes

Devin Ryan — Sat, 19 Sep 2009 11:39:52 -0000

In order to change the which vlan the port is on execute the following command:
2950# config t
2950(config)# int Fi0/1
2950(config-if)# switchport mode access
2950(config-if)# switchport access vlan 100
2950(config-if)# exit
2950(config)#exit

Re: Cisco 2950 Switch: Create a VLAN | Cisco switch | Tech-Recipes

Moodi — Tue, 21 Jul 2009 14:59:30 -0000

how do i take a port out of vlan

My Setup is such

Port Name Status Vlan Duplex Speed Type
Fa0/1 connection to name connected 100 full 100 10/100BaseTX
Fa0/2 connection to name connected 100 full 100 10/100BaseTX
Fa0/22 connection to loca notconnect 1 full 100 10/100BaseTX
Fa0/23 connection to loca notconnect 1 full 100 10/100BaseTX
Fa0/24 connected 100 a-half a-10 10/100BaseTX
Gi0/1 connected 100 full 100 10/100/1000BaseTX
Gi0/2 notconnect 1 auto auto 10/100/1000BaseTX

I want Gi0/2 to be part of 100 not 1

How would i go about doing that.

Re: Cisco 2950 Switch: Create a VLAN | Cisco switch | Tech-Recipes

ravi — Mon, 02 Mar 2009 23:24:40 -0000

it's nice